KEVIN “GOBLINMASTER” ADAMS! and some finished figures

One of my two favourite figure scultors (Bob Olley being the other) has finally decided to set up his own dedicated webspace come shop. The one and only Kevin “Goblinmaster” Adams. I have been a fan of his work since the mid eighties and it was his figures and the accompanying fluff in White Dwarf that made me (until recently) Orc and Goblin to the core. If it ain’t a KA Goblin then it ain’t a Goblin. Although to be fair Brian Nelson gave it a fair old stab. Over the years I have tried on a limited buget to try and back various projects of his; 4A Miniatures, some rather nice Sea Goblins; Crooked Claw, a rock thrower; Greenskin Wars, armoured Orcs and Goblins; Ral Partha and Warmonger Miniatures.

Then there was the vicious attack upon him where he was seriously injured. This prompted various sculpters to produce figures for “Goblinaid”.

This brought Kevin back into the limelight and he has been busy, for other people. This looks set to change as he has just announced a new website.

http://www.goblinmaster.online

There are tentative plans to launch a Kickstarter on the First of February and from the photographs on the site there appears to be a new Pump Waggon. YAY!

The Facebook 2020 Painting Challenge group has spurred me on the get the unit of Skiing Dwarves finished. They had been sat for far too long on my desk and I think my sticking point was the unit standard. I am still not happy with it but once it was done the rest of the figures seemd to come on much easier.

These are available from

https://www.oldschoolminiatures.co.uk/

Busy

The last couple of weeks have seen me busy. My 3D Printer has decided it wants to start behaving again so for the last week it has been printing pretty constanty. It is slightly stringy but I don’t want to mess with the settings just yet. The strings can be dealt with pretty easily with a scalpel and file. I have managed to print an elemental cavalry unit for one of my Dragon Rampant armies, a skeletal giant for another DR army and on the print bed at the moment is an Ork Gobsmasher, a replica of an old Armourcast model. All of these are freely available from http://www.thigiverse.com. Next up is a replica of another Armourcast model, the Warhound Titan. The originals don’t come up for sale much and when they do they are quite expensive. You can see some images of the Titan here

https://rustymagos.wordpress.com/2014/10/17/armourcast-titans/dscf3252/

Tool making was next on the agenda. Number Two Son has been watching “The Mandalorian” and loves the helmet the protaganist wears. He also discovered on Youtube a cosplay video where they described in great detail, with downloadable plans, how they made one out of EVA foam. He would like us (me I expect) to make it. One of the tools they used was a rounded metal former. I had a cut off section of railway track and with a bit of work with an angle-grinder I ended up with this.

I have a rusty H Beam section which will get the same treatment.

A recent discovery (thanks Daughter!) has been the app, “Wish” where you can buy goods directly from the factories in China. I bought a 2m strip of LEDs for €3, that was including postage! I added them to my photo thing.

This is how it was originally
Now with added lights!

This has been expanded with a paper holder on the back and trays underneath if I want to do some more scenic photography. I will be getting some photographs printed up with dramatic skies. The light is a little yellow but I did a manual white balance on my camera and my first test result seems promising.

I am keeping up with my New Year Resolution, so far and also the 2020 painting Challange.

If doing basic carpentry, remember to keep your fingers BEHIND! the chisel.

Then there is my new paintrack. I had been running out of space for my paints and I had promised the Boys that they would have a paint rack in their painting desk. So they get my old one and I get a shiny new one.

Nice and tidy
Clutter added

Not a resolution as such

In an effort to keep up with the painting I have joined a new Facebook group. 2020 PAINTING CHALLENGE.

The object of the group is to paint one figure a week and post the finished results weekly. If you manage to post 52 figures in the goup album you will receive a specially commissioned figure of “The Painter” sculpted by John Pickford.

I have a few unfinished projects sitting on my desk for far too long so this might be an incentive to get them done. First up are the nine remaining figures from OS Miniatures Alpine Dwarfs. Coincidently they are also sculpted by John Pickford. They are halfway there and it wouldn’t take too much to get them done.

Here they are based and ready to go, three years ago!

Getting the desk clear of old projects would be quite motivating, nothing worse than staring at half done figures. And then, one project at a time on the desk.

Yeah right!

My product of the year 2019

I have been greatly impressed by Reaper’s Bones Black range. Reaper’s figure range are sculpted by world class sculpters, really charactorful and lovely to paint. Just a pity I can’t quite afford them. Then a couple of years ago Reaper brought out their Bones range. These were white plastic versions of existing sculpts (and a lot of new, funded by various Kickstarters). I had a look but I wasn’t impressed. The details were soft and soapy (Mantic anybody?) and the plastic was bendy. Then, very recently, Reaper announced that they were bringing out a new range of plastic figures in a harder plastic, Bones Black.

I picked up three figures in October to have a look at the quality. And I have been impressed. Not quite as crisp as metal, but if you apply the “Three Foot” rule you would not be able to tell the difference on the tabletop. As all cast figures there are moldlines. I haven”t quite perfected the technique of removing them, but that is down to me not to any problem with the models themselves. Primer was applied, next time I might give them a quick scrub in warm soapy water, and it stays where it should.

Here is the first figure I have been working on. As I said in previous posts I haven’t had much painting time in the last couple of months. Something I intend to remedy next year.

I am very enthusiastic about this range which is being added to every month. December’s releases have two figures which have been on my wishlist for a while. The prices are affordable, quality sculpts what is there not to like?

I would like to take this oppurtunity to wish everyone (and you Ruth) a Happy New Year!

More distractions

My Number One Son asked me to paint his Nerf gun. He wanted it dirty and greasy like my tanks.

He is delighted by it. Now to test how resilient the paint is.

I did post it on Facebook last night and so far have had over 125 likes. This is slightly frustrating as I generally only get about 30 or 40 likes for my own work. C’est la vie.

Frohe Weihnachten

This last couple of months has seen me busy, but not, sadly, painting. First point of atta ck was my workshop. I am due to inherit some tools and workshop furniture from my departed father-in-law and I want to get everything ready so that the bits can slot into place with the minimum bother.

One view of how the workshop used to look.
And now the new look.

The cabinet in the middle, with the blue drawers, has been made to house various small bits and bobs that had been floating around without a place to live. The carcass was made from 12mm plywood generously supplied by Electric Love. I even had a couple of young lads who were at a loose end cut the timber for me.

I’ve made some more screw boxes as I have a large collection of unsorted screws. The screws were collected from Electric Love, at the end of the festival the tool cases were emptied and all the loose screws were binned.

Having to get up at a rediculously early hour to get the Boys ready for school is that there have been some quite amazing sunrises. Here are a couple, unfiltered or tampered with.

The next job which has taken the most time was making a painting area for Number Two Son. This necessitated moving book cases and vitrines around the Hobby Room.

He will be getting my old paint shelves and I shall make some expanded ones for me seeing that my paint collection has grown. I will take more photos of the Hobby Room once it has been cleared. My Daughter, Boyfriend and my Granddaughter stayed for ten days, so all the excess furniture we had been storing in the Guest Flat got decanted down into the Hobby Room.

Finally I would like to wish you all Season’s Greetings.

This Years card

Here be Dragon

Old School Miniatures have a new project up for pre-order, The Battle of the Vale. Featuring Halflings fighting off various chaotic thugs.

The main attraction for me is the Dragon and the Thief.

https://www.oldschoolminiatures.co.uk/the-dragon–the-thief-43-c.asp

This has been sculpted by the depressingly talented Aaron Howdle.

You can visit his website and take a peek at his rather lovely illustrations.

Portfolio

The brush is dead! Long live the brush!

I have been meaning to replace my brush for the last year as hairs got less and less. But it was always I’ll do one more figure. I did briefly toy with another brush, but it split so I went back to my old faithful.

I bit the bullet about a week ago. i was sorting stuff out to make a painting area for Number Two Son when I came across a box of brushes carefully stored. Read hidden. In it was another of the same brush. Foundry Sable Mix General Detail.

If this new brush paints as well and lasts as long as the old brush I will be buying a few more.

Going back Gnome

The most excellent OS Miniatures company has a new Kickstarter.

More Gnomes!

As you know I have a great love for these figures and can’t wait to get my hands on this new unit and extras.

Please go and support it.

A new Member?

This Blog isn’t usually used to promote politics, however on of my followers is standing for election in the upcoming UK elections.

May I present Steve Heller, prospective MP for Camborne and Redruth.

Mr Heller writes for the wonderful news site Cornish News. Highly recommended for its topic takes on news items from around Cornwall.

https://cornishnews.com/

Here is Steve’s manifesto.

Proper job

Orktober

Orktober this year has been rather busy. A trip to London and reorganising the hobby room so I can put a painting desk in for Number Two Son.

I did however manage to finish this little tankette.

The main chasis is from Ramshackle Games.

The main part of the turret, the exhausts and the Schürzen are scratch built.

The Ork is from Kromlech

https://bitsofwar.com/home/125-orc-tank-crew-.html

Gifts

On my trip to London I was planning to stay with my old gaming buddy Seb. https://mugodice.wordpress.com/

Us two

I really wanted to make something really nice for him to say thankyou for putting me up and for all the wonderful birthday presents he has given me. For some reason I am never organised enough to get a present to him in time for his birthday.

We had both backed the Kickstarter for Open Combat, a skirmish wargame. https://www.secondthunder.com/ But neither of us had played it. I know that for Seb space is at a premium so I decided to make him a portable version. The rules are written for 28mm but the author also suggests that it can be played in 15mm and convert the measurements from inches to centimeters. This means the suggested playing area would be 24 centimeters.

Here I am measuring some canvas to be used for the play area. Obligatory kitten for scale.
Double checking size and trimming.
Long suffering Wife hemming the edge for me.
Spreading on a mixture of silicon and paint.
Applying sand, for the path and flock.
Excess removed and ready for play.

I had instructions about how to make the playmat from The Terrain Tutor’s Youtube channel.

https://www.youtube.com/channel/UCx_aro8CTHw7ZD5H661hC6Q

The flock instructions came from Luke’s APS Youtube channel.

https://www.youtube.com/channel/UCsmD5774MOQhjYBkXqu3Jdw

The finished box, roughly shoe box sized.
Lid removed.
Hills. I went with a stylistic approach which is easier to place figures.
Difficult terrain.
Fields.
Individual trees and standing stone.
The dice tray revealed.
Dice tray removed to reveal figure storage.
Action tokens and movement sticks.

The figures came from Alternative Armies. There were some nice ones and a couple of ropey ones. That’s what comes of buying blind I suppose. https://www.alternative-armies.com/

I hope Seb is pleased with this and gets a chance to play.

SELWG 2019

I’m off to London in a couple of days time. I have two major objectives this year. Firstly to meet my new granddaughter Ember. Secondly to attend SELWG.

http://www.selwg.org/2019-show-1

This the annual wargames show presented by The South East London Wargames Group. Held at the Crystal Palace Sports Centre so everything is tinged by the sceny of chlorine. It is a small show, but after living like a hermit for most of the year it seems quite busy for me.

Hopefully I will be meeting some Oldhammerers and I will be going with my old gaming buddy Seb, writer of the blog

https://mugodice.wordpress.com

I am amused that the main image for SELWG has me handing out cards.

I have patiently visited all the traders websites and made my shopping list. Sadly this year the organisers haven’t got their act together and made a floor plan.

A little Renaissance fantasy

A disclaimer: this is totally ripped off from Wargames Illustrated 382 and David Bickley who built the original. You can read his blog here:

http://www.talesfromghq.blogspot.co.uk

I kept coming back to this article and mulling over it. I really don’t have time to get distracted by another project but it was sooo tempting. Late one night I pulled out a piece of paper and started doodling. The next day some graph paper was procured. Too late! Project started!

As Mr. Bickley had produced his model from individual parts I decided to follow along and make mine in modules starting with the front gate.

Me being me, there have been a few upcocks in the design, but nothing that a hammer wouldn’t sort out.

Obligatory kitten for scale

The original suppliers who inspired this build are:

http://www.charliefoxtrotmodels.com

http://www.warbases.co.uk

http://www.wargamesbuildings.co.uk

Paint a Bob

Another favourite thing. The Oldhammer Community Facebook page is running a “Paint a Bob” competition. During the month of September paint a figure sculpted by Bob Olley. To prevent any duplicity entrants had to post a photograph of their chosen model with this image as a backdrop.

I was undecided which model to pick, these wer my selections.

Sat at my desk this morning I decided on the Dwarves. Then I realised that they were a set of four, I dug the last one out.

#paintabob