A Treewoman from Ultraforge. She will be a giant in my Warhammer Fantasy armies. I’ve been looking forwards to painting her. This is my Christmas treat.
This is a unit of Pixies for my Albion Army. I’d already started painting them in England, but I’m not impressed by the work done. So this is a rescue job. They’re all individual figures so I’m not batch painting.
This is the Ork jet I’d started earlier this year and I’d like to finish it.
I’m not too much out on my painting targets for this year and I need to think about what my targets are for next year. I want to spend one month finishing my Field of Glory Roman Army. That would bring completed armies up to the grand total of two. If I solidly paint for the rest of the year I could finish my Napoleonic Army, but I think go bonkers painting eight infantry, three cavalry and two artillery. I’m going to split it up between Albion, Napoleonic and the Imperial Guard Army that I seem to have accumulated. Plus some one offs as treats.
Category Archives: Peninsular War
Am I the last person to the party with this resource?
I just spent an afternoon reading and adding to my “Library” all the books that I had thought of tracking down on eBay.
Warhammer Ancient Battles for forty quid? I don’t think so. Most of these titles I’d only look at once or twice a year so money (I don’t have anyway) saved.
24th (or the 2nd Warwickshire) Regiment of Foot
Here is my first unit of Redcoats finished. I am very happy with the finished result. Apart from the two casualties, who are from Offensive Miniatures, the Company is made up of Foundry figures (sculpted by the Perrys). The bases are from 4Ground drilled and fitted with neodymium magnets. The movement tray I made. Standards are by GMB Designs.
Another four Companies to go, two Highland Flank Companies, a Company of Portuguese Foot, three Companies of Cavalry and two Artillery.
The wife is away cheffing at The Taste of London festival so painting time has been reduced this week. However I am using what time I have by making more Napoleonic movement trays. I’ll post how I make them, it is a fairly simple job.
Can you tell what it is yet? Part 2
This is my current painting set up while I am between houses and I just fancied having something a bit more tailored for my needs, rather than an old tray.
Can you tell what it is yet?
Can you tell what it is yet?
A little side project.
I finished my Romans early so I did a Goblinaid figure, Paul Hick’ Napoleonic Goblin. It was an opportunity to try out paints for my Red coats. After a bit of looking through books the uniform looks rather Frenchie. It is fantasy so I don’t think anyone will complain, too much.
If I feel brave I might take one of my 95th Rifles and experiment with darkening the uniform as it is too light.
Another basing interlude and thoughts on motivation
Just trying out a new product for basing. No More Nails. I have no idea what the German name is. I’m using this to glue the figure to the base and to fill in between the figure base and the base.
So far the result is fairly promising, the only thing that I need to work on is smoothing it out afterwards, it’s not as easy as the ready mixed plaster I have been using.
I really should be getting on with the projects that I said I would rather than getting distracted. I have just about finished the Albion heroes and the Albionican unit. They just need varnishing and photographing. The Reaper Necromancer Babe is underway. I will need to do some interweb research on what near naked skin looks like. Surely there will be sites I can study in great depth? Other distractions have been the Goblinaid Spacer Goblin sculpted by Mark Cragg. Prepping a unit of Napoleonic English and a Raging Heroes female kommisar.
Peter from D6 Painting and Gaming wrote a good article on his blog about what keeps him motivated to paint. At the moment I have been distracted by various models rather than committing to paint. I think that everybody has some form of reward system. Mine is if I paint a unit I can paint a hero/leader. I love painting individual figures and find painting units a chore.
There are two things I use to keep me on track. The first and probably the most important is to keep my Lead Mountain out of sight. Only one project on the workbench at a time. I love opening boxes and picturing the painted model in my mind, or discovering a model that I had forgotten that I had. It is also slightly discouraging seeing how much work there is ahead of me. At the moment all bar a couple of boxes are in storage in the lager. The second thing I use is a list. One item on the list a month. It helps me stay focused.
Next month is my Roman Army. I need to finish my Scorpions and a unit of Auxiliaries. Add metal highlights to all the other units. Photograph, catalogue and put on the website.
A unit of Napoleonic infantry
The reanimated DKK Troopers and command vehicle from Ramshackle Games
GW Squig Mangler
Unit of plastic Warlord Games Celts for my Albion Army
Three Ork jets from Puppets War which will be proxy Deth Kopters
Finish a unit of Faeries and a unit of Undead for my Albion Army
Finish my Bolt Action Home Guard and a unit of British Infantry
Ultraforge Tree Woman a proxy giant in my Albion Army
So if I stay on target, this will be the next nine months work. This doesn’t allow for any distractions like taking any commissioned work (no takers yet), any Kickstarter bits arriving or the bust of Kevin Adams which I am itching to get started on.
95th Rifles Black Powder Napoleonic Peninsular War
This is my 95th Rifles Black Powder Napoleonic Peninsular War, from March’s workbench.
The figures are mostly Foundry, sculpted by the Perry’s with a couple of Perry plastics thrown in. I’m not happy with the colour as it is much too light, they were known as the “Sweeps” as the uniform is a very dark green. Maybe in the future I’ll do a black wash over the uniform to darken it. Hopefully any opponents won’t complain too much about the inaccurate colours.
The movement tray is a custom cut from Wargames Tournaments
Black Powder Command Group
This is my Black Powder Command Group for my Napoleonic Peninsular Army.
Figures from Front Rank.
What’s on April’s workbench?
What’s on April’s workbench?
There is a small squad of Albionican Empire troops from Warploque Miniatures. This is for my “Not-Empire” army.
Some heroes for my Albion Army, miniatures from Studio McVey, Hasslefree, Celtos and Privateer. These just need a little touching up and basing to match the Halflings.
Finally, if time allows, a necromancer babe from Reaper.
This month is a relaxing one as I found the unit of 95th Rifles a bit of a slog.
These are the ten books I would recommend for a bookshelf. Bear in mind that this is my choice and that it isn’t to everybody’s taste. I would welcome any suggestions as there is always something new to learn regarding our magnificent obsession.
So here they are in no particular order.
Editing is an arse on WordPress. I want my text aligned left and the bugger centers it!
Next on the workbench
This is the next job on the workbench, or rather the kitchen table. A unit of the 95th Rifles for my Black Powder British Peninsular Napoleonic Army. Most are by Foundry (thanks CSM) and there are a couple of Perry plastics in the mix as well.
Everytime I finish something now I put away the paints, clean brushes, new paper towels, basically a clean slate.
I’ll post a picture of the command group that has just been finished later this month.
Time rich, money poor
My plan is to have every unit in my collection kitted out with a movement tray. This has been easy for Warhammer Fantasy Battle, Black Powder and Field of glory. I spent the last few months at my last job, when I knew I was being made redundant, making stuff in the workshops. Three aluminium/brass carry cases and more movement trays than you can shake a stick at. They’re easy: a rectangle of plastic cut to the right size, a border strip made of six mil plastic and a thin sheet of mild steel cut to the unit’s size. Glue together, Dremmel sides, superglue some sand on and undercoat. Job done, ready to be painted up when the unit is ready so that the bases match the movement tray.
Now with 40K and Bolt Action there are round bases. Not so easy. 40K uses, for the main, twenty five mil circular bases. Bolt Action uses two pence coins. Foreign readers may question why so many English wargamers use money to base there figures on. Are we extravagant? No, the answer is that the two pence piece is more enough worthless. Plastic bases cost more to buy. Plus, if you get the older coins, they are attracted to magnets. Another love of mine is magnetised units, I have seen plenty of instances where an opponent has placed a unit on a hill only to see them slide away. Not me, I’ve magnetised more or less everything.
Anyway back to the circular based movement trays. 40K has twenty five mil bases and Bolt Action has twenty six mil bases. So what is one millimetre between friends? I don’t think anyone will notice a slight gap on my 40K units between base and movement tray.
OK. Time rich money poor. That’s me, plus I’m a tight bastard. I have seen some laser cut trays on Fleabay for between two and three pounds each, plus postage. I’ll probably need thirty odd. So the money mounts up. So what does one of these fancy laser cut movement trays consist of? Two sheets of MDF. The bottom one is plain and the top one has holes cut in it.
What am I not capable of doing?
I drew up some templates in Indesign, just to work out the size of the base. A ten man movement tray worked out to be ninety five mil by one hundred and thirty mil. Wouldn’t mind some five man movement trays and some twenties. Bauhaus has one square metre of three mil not-quite-MDF for four Euro something. From this I can get thirty nine movement trays. Went to Bauhaus on Monday morning armed with cake to bribe the wood cutter. Got the wood cut and purchased a twenty six mil hole cutting attachment for my drill. In all it came to twenty one euros on the nose.
All that is left is to drill the holes for the bases, stick them together and finish as appropriate for the unit.
The biggest chunk of that was the drill bit at Fourteen something Euro. But I have that now, so any time I want more movement trays it’s just the cost of the wood, which is minimal.