About grumpyoldtin

An old git over the hill and declining disgracefully

What I did in my holidays

Every summer my Wife and the Boys drive down to Croatia for a holiday. Well somebody has to stay and tend to the chickens and cats. My chance to have a bit of time to myself and spread out and finish any projects that have been on hold for a while. I was a bit ill with a virus that made me very tired and demotivated so I didn’t do as much as I wanted.

Way back in 2011 I was approaching my redundancy at St. Martins and I used the time wisely. I made a whole load of these.

A plastic base, wire looped and glued into position, sand and PVA applied and primed in black. I didn’t do anything with them until now. This was the base build for some hedges. Following Mel’s videos on his YouTube channel I made a load of foam clump foliage. https://www.youtube.com/watch?v=ZN16RxVNrvc Then following Luke’s videos on his YouTube channel I hade some flock. https://www.youtube.com/channel/UCsmD5774MOQhjYBkXqu3Jdw Using Luke’s videos I purchased some Tacky Glue, I must find somewhere here in Austria that stocks it because the postage was a killer. At my local DIY store I purchased some spray adhesive.

Stage One: paint base brown. Stage Two: drybrush base. Stage Three: apply Tacky Glue to wire and press on clump foliage. Stage Four: spray on adhesive and sprinkle with flock. I didn’t bother photographing these stages as you will get a better idea from the videos.

What I managed to do. There are some still to do but I had run out of clump foliage and the blender used for making it was awaiting a part from the UK.

Figure for scale, available from Heresy Miniatures

I must mention that Mel has been hard at work and recently had a Kickstarter to promote a book all about making wargaming terrain. If you missed it, or like me don’t have a form of money that Kickstarter recognises…. you can get on board herehttps://terrain-essentials.backerkit.com/hosted_preorders

Save

Electric Love 2019

This was my fourth Summer working here and I think my last. I greatly enjoyed the production side of the job, the actual making and preparing for the festival. But working at the festival under the supervision of “Team Leaders” who liked to show off their status and avoid actual work was not so much fun.

So let’s crack on with the pictures. Look away if you are at all squeemish. It was my Summer job, but on the first day it snowed.

Production has moved away from Thalgau, a bike ride away, to Hallein which is much further away. Production has now taken over what was an indoor kids playground where we used to take to Boys.

I had a little mishap. The “official” story is that I was in a container and dropped a big box of screws on my toe. The end result was that I ended up in hospital with a broken toe. I’m waiting on what is happening with sick pay. HR have been nice to me so far, and I had two weeks working in the storage/supplies, in theory with my foot up as recommended by the hospital, in practise errr… no.

As usual we had to contend with the rain

On the first day of the festival Red Bull put on an amazing display, which my old camera was far too slow to capture. Four aircraft, two WW2 Planes and an acrobatic plane and jet. The whole display was wasted on the crowd who were seriously indifferent.

The festival site
Obligatory selfie in front of the Q Dance stage
Too drunk to care
I had four days, during the featival, zooming around the site on a Gator

Sound systems from around the campsite. Some people didn’t even bother going to the festival and spent their time partying there.

And Paris Hilton came to visit. She didn’t say, “Hi!” though.

Updating

So that’s the Summer done and dusted. I have been a little slow on the progress reports. A combination of laziness and the Black Dog.

Look forwards to a flurry of updates, well maybe one or two. Let’s start with the painting done before Electric Love.

These two are from the Old School Miniatures range. “The Circus of Corruption” Jamie sent them to me and it seemed rude not to paint them up.

https://www.oldschoolminiatures.co.uk/circus-of-corruption-15-c.asp

More from Jamie. These are from the abolutely gorgeous Gnomes range. This is part of the Baggage Train. I swapped out the goat and replaced it with a snail which I thought was more appropriate.

https://www.oldschoolminiatures.co.uk/alpine-gnomes-3-c.asp

As you might have guessed I love this Gnomes range of Jamies. Some scenery is forthcoming from me and this is the first.

Next up is from Alternative Armies. This guy will be used in my Beastman unit in my “Not” Imperial Guard Army.

GRN53 Zarglain High Prefect

I couldn’t get (rather couldn’t afford) the Beastman Squad Leader, so I settled for this guy from Forgeworld.

More updates on the painting coming soon. KEEP WATCHING THE SKIES!

 

Save

Tabletop Knights Gaming Day 2019


I really should have written this much sooner, as always laziness overtook me.
For a far more eloquent account of this event I will direct you to
https://www.battlebrushstudios.com/2019/04/show-report-tabletop-knights-games-day.html
I decided to forgo Walter’s Austrian Salute this year. Walter has no intention of expanding and with last years event with a lack of sales and culinary disaster I wasn’t keen to attend.
Christoph’s event, Tabletop Knights, was a bigger event and he is keen to expand.
Preparing for this event has taken a couple of months making two display boards, Nessus and Gone?
Two days beforehand i was struck down with the lurgy, cold, tired runny nose. Great!
First day of the school holidays, which would normally be spent sleeping in, we got up extra early so we could drive to Germany and set up for nine.
There were a couple of traders there.
Obviously Christoph with his lasercut Roostermodels products. Which reminds me to get a banner made up.

Roll The Dice. I had made some little give-aways for them and Martin appreciated them. I had hoped that he would bring some paint along as I have a few gaps with need filling. Sadly no.
Spiele Cafe had a tombola, which my Son’s happily indulged in, and some demo games.
Spellebrette (can’t read my writing) had discount GW.

My table set up


The day was started by and address by Korbi.

View of the hall


There was a 40K tournament running downstairs


So on to the tables and games.
Roll the Dice had two demo games. Wild West Exodus and the Warlord Games ripoff of Wings of War.

GW Night Vault.
Unpainted figures.


Summoners
Interesting models.
But not another rule set?


A Song of Ice and Fire


Gates of Antares
Interesting cardboard scenery


Last Days
Yet another zombie apocalypse!


Test of Honour


Frostgrave
With Christoph’s scenery


Dead Man’s Hand
Something that potentially of interest to me.
Christoph’s scenery


Freebooter’s Fate
Nice scenery from 4Ground


Guildball
Bloodbowl anybody?


Age of Sigmar
‘Nuff said


WH30K
Nice scenery from Deathray


WH40K
With added Tyrannids, a lot of them!


Walter playing Saga


The usual Star Wars
Legion and Armada


Painting competition


Trade was very slow. Until lunchtime my biggest sellers were some coffee mats that I’d made with scraps of wood from the Happylab recycle bin. I managed to sell my entire box of scrap off-cuts from laser cutting. I had a couple of enquiries about making some custom token trays. Sadly nothing has come of this. Martin from Roll the Dice bought some of my static grass to test out the waters.
I did enter the painting competion, and got a third place in the single figure catagory with my Earth Warden.
There was no culinary disasters and the food was hot, plentiful and reasonably priced.
Overall the day was a bit of a disapointment. Low sales, a supposed gaming opponent didn’t show and a long wait due to the 40K tournament for the awards ceremony. If I do attend next year I will not be putting such an effort into a display board.

Nessus

This is the second board that I made for the Tabletop Knights gaming day. My kind Daughter gave me a copy of Destiny 2 when she gifted me her old PS4. One of the worlds you visit is Nessus.

This is not my image and it is used without permission

I fell in love with the visuals and wanted to recreate them. In the small space of a Kill Team board I wouldn’t be able to do it justice, but maybe I could give a taste.

First up was to make flocking, My local DIY store gave me a small piece of pure white foam and the poundshop provided cheap paint to colour it.

Planning out the board

Laying down 10mm of foam under the “metal” floor plates. I wanted them raised so there was some variations in the floor level.

The buildings

Adding the sides for extra strength.

Glueing parts into position

The crane

Adding colour and weathering.

More details.

Some of the columns in place with vegetation.

Set dressing.

Over all I wasn’t so happy with this board. There were a few tiny mistakes. I didn’t like the colour scheme on the buildings. I would have approached it differently next time. I have no idea where I am going to store it now. I did offer it up for sale at the event, but no interest.

Gone?

This is the first post of three regarding the Tabletop Knights show in Germany.

This will be about the first display board, Gone?

I saw this image, credit to whoever did this (if you let me know I will credit that person here) and thought, “I want this!” If you are interested I have a Pinterest page devoted to scenery. Look for Nik Green. I highly recommend Pinterest as a resource for keeping ideas from all over the interweb neat and tidy and in one place.

I got the dimensions of a Kill Team board, thirty by twenty two inches, and got two sheets of chipboard cut.

Clamping the sides

Burning the splinters off the cheap wood frame

Trimming the foam for the inserts with my Proxxon

Foam inserts fitted

Playing around with ideas

Track chopped out and starting to detail the edges with strips of cork tile

A Lego wheel being used for detailing

Gravel from Walersee and fine river silt used for detailing

Building before and after painting

Starting to build up the layers

I made a pipeline out of some scrap pipe from a skip and some laser cut supports. I magnetised the feet so it could be removed for transportation.

Everything in situ

Silt! Silt everywhere!

Paint and weathering applied

Tuft mania

And then scatter

I think the scatter needs to be more yellow to match the tufts. Added to this was some water effects. Overall I am very happy with this board. Some minor tweeks as noted are required.