I’ve been using filament from GST3D for the last year or so. Mainly because it is dirt cheap, if you wait for the sales, and because the quality has been good. That is until recently. My last batch of ten has had three rolls fail. One badly tangled and the other two damp resulting in clogs. Social media has been filling up with complaints about GST3D recently and they have promised to improve. We shall see.
I have started printing some “Vase Mode” models. Specially designed to only print the outside surface.
This is from the Sinister Cities Kickstarter. A free model so you could appraise the results. It is printed with a thicker nozzle, 0.8 rather than the usual 0.4, so the layer lines are noticeable. At arms length not really. This seems to be a good method for bashing out terrain.
Finally a squad of ten Terminators for the Space Hulk game I am 3D printing. I have printed all the corridors need for the Second Edition, just have to get on and paint them. Batch painting from hell. Starting with a black basecoat, then a zenithal highlight, a colour wash over that, detailing and finally rust and grime. Can’t wait.
Welcome to 2022. Who knows what shitstorm it will throw at us. Thankfully the last two years haven’t been so bad for us. A combination of a large house and garden and good weather. Hopefully this coming year will be kinder to a lot of people.
As promised here is a round up of the painting from last year.
This is part of my modular terrain
This was a big paint project that I had been putting off for a while. I don’t know what I will use it for. But I wanted it.
I have to say thankyou to Jamie Loft, Old School Miniatures, for the Gnomes AND for the 2021 Painting Challenge on Facebook. Without it I would have not been at all motivated to paint.
Unless you are living somewhere remote it can’t have escaped your attention that we are living in the times of a pandemic. Austria, like most of Europe, has told everyone to stay at home and only go out if it is strictly necessary. Schools have closed and gatherings of more than five people have been banned. England, however, has told everyone that they can, “Take it on the chin” and to be prepared to say goodbye to loved ones. After years of Tory austerity the hospitals are going to be hard pressed to cope.
Welcome to the Isle of the Damned.
It is day two of the lockdown. Luckily we have a garden to escape to and the weather has been rather pleasant. I have drawn up a list of little jobs that I have been putting off for, in some cases, years. There is no clear end date in sight so let’s see how long I last before going stir~crazy.
Two knock~on effects of the plague have been HappyLab closing and the cancellation of the Austrian Salute. The cancellation of Salute will affect me financially. I will be better off! Going always costs me money which I never recoup.
I had made a little freebie for the show. Hopefully It may get rescheduled for later in the year.
I had started making my annual freebie for this year’s BOYL event. Bring Out Your Lead, the annual gathering of the Oldhammer community.
Painting progress, I have finished off the twelve skeletal archers for my Dragon Rampant Undead army.
As a bit of a palette clenser I am painting this figure, a Fattie from Judge Dredd.
I originally got into Toy Soldiers via Judge Dredd and 2000ad. I got the role playing game and started to get the figures that went with it. This was one figure and I had pledged to myself that I wouldn’t buy any more figures until I had painted it. After thirty five years I am making a start.
My next project is a bit of fun.
This goes with my Weird War Two ideas. I have the Doctor, Tardis and two “Ironclads”. I have Hitler and Churchill and a nazi film crew. I have managed to locate a model of the Ark of the Covenant. It should be a relatively quick job, chrome underneath and German camo on top. If anyone has a couple of Balkenkreuz going spare let me know.
After this I am prepping another unit of Gnome crossbows, kindly donated by
One of my two favourite figure scultors (Bob Olley being the other) has finally decided to set up his own dedicated webspace come shop. The one and only Kevin “Goblinmaster” Adams. I have been a fan of his work since the mid eighties and it was his figures and the accompanying fluff in White Dwarf that made me (until recently) Orc and Goblin to the core. If it ain’t a KA Goblin then it ain’t a Goblin. Although to be fair Brian Nelson gave it a fair old stab. Over the years I have tried on a limited buget to try and back various projects of his; 4A Miniatures, some rather nice Sea Goblins; Crooked Claw, a rock thrower; Greenskin Wars, armoured Orcs and Goblins; Ral Partha and Warmonger Miniatures.
Then there was the vicious attack upon him where he was seriously injured. This prompted various sculpters to produce figures for “Goblinaid”.
This brought Kevin back into the limelight and he has been busy, for other people. This looks set to change as he has just announced a new website.
There are tentative plans to launch a Kickstarter on the First of February and from the photographs on the site there appears to be a new Pump Waggon. YAY!
The Facebook 2020 Painting Challenge group has spurred me on the get the unit of Skiing Dwarves finished. They had been sat for far too long on my desk and I think my sticking point was the unit standard. I am still not happy with it but once it was done the rest of the figures seemd to come on much easier.
In an effort to keep up with the painting I have joined a new Facebook group. 2020 PAINTING CHALLENGE.
The object of the group is to paint one figure a week and post the finished results weekly. If you manage to post 52 figures in the goup album you will receive a specially commissioned figure of “The Painter” sculpted by John Pickford.
I have a few unfinished projects sitting on my desk for far too long so this might be an incentive to get them done. First up are the nine remaining figures from OS Miniatures Alpine Dwarfs. Coincidently they are also sculpted by John Pickford. They are halfway there and it wouldn’t take too much to get them done.
Getting the desk clear of old projects would be quite motivating, nothing worse than staring at half done figures. And then, one project at a time on the desk.
As a reward to myself, I am not a fan of batch painting, for finishing the Gnomes I painted this fellow.
I couldn”t get the figure I was after (see previous posting) so I got this guy. Originally from Forgeworld, I got him second hand from The Troll Trader. He’s allright for a Truro Boy. https://thetrolltrader.com/ He will be the squad leader in a unit of Beastmen in my Not Imperial Guard 40K army.
Obviously I got distracted after that. So rather than finishing the Dwarf Skiers from Old School Miniatures, sorry Jamie. I found these really cute Elementals on Thingiverse. https://www.thingiverse.com/thing:3388214 I wasted (no) time in printing off a load and here is a test paint of one.
These are going to be based up for use in Dragon Rampant. Not that I am ever going to play it, more’s the pity. At the moment in the queue I have a: Renaissance Army from a recent Kickstarter, Undead Army mostly comprised of Bob Olley Essex Miniatures (gorgeous sculpts, I ended up buying some more to fill the gaps in my collection), Orcs and Goblins from my spares box and now an Elemental Army.
And then a couple of weeks ago I got a box of bits from Jamie. https://www.oldschoolminiatures.co.uk/ I got more distractions in the shape of more Gnomes. I’d asked for a unit of Undead Gnomes to go with my Undead Army and in the package was this guy.
I had to paint him immediately. I made a totally impracticle 20mm base for him to go on.
Now I need to crack on with two Kill Team display boards which need to be finished in about six weeks time for a show in Germany.
You may remember I have been growing closer ties with The Old School Miniature Company. These ties will continue to grow. I have reviewed my sales from this blog and they have amounted to zero. When it is time to renew my contract in March I’m not going to pay for the additional functionality, but settle for a more streamlined site and save myself seventy Euros. I’ll keep the dot com this year as I have had cards made up with that address, Next year I will get my own site and save more money. Maybe. OS Miniatures have their own shop and I have been getting a few orders from it. So for me it’s a lot easier to make one parcel stuffed full of bits and post it off and let them do the marketing, which I suck at, etc.
Anyway back on topic.
A while back OS miniatures did a Kickstarter for a Gnome army suitable for Warhammer Fantasy Battle. This came complete with Army Lists for Third Edition and Sixth Edition. They looked like a nice fun army and Jamie from OS Miniatures obliged me with a set.
I’ve painted them in a quick and dirty style. Base colours, a wash and highlights on the flesh. The banners probably took more time than the units they are with. The image is scanned from a book. Resized in Photoshop and printed out in BW on my laser printer then painted. Each base is magnetised and the movement trays are from a big batch of Micro Arts Studio that I got on the cheap from Troll Trader. The grass tufts and flowers are made by me and will soon be on sale at OS Miniatures.